Top-Rated Commercial Plumbers in Akron, OH

Completed sewer conversion by installing sanitary sewer lateral from existing tap to main drain, replacing the property's septic system. Excavated trench to proper depth and specifications, installed green PVC piping with appropriate bedding material consisting of gravel base for proper drainage and pipe support. Pumped and crushed two existing septic tanks per project requirements. Obtained sanitary sewer lateral permit from City of Akron prior to commencement of work. Ensured all installations met municipal code requirements and prepared site for inspection. Trench excavation revealed clean soil cuts through multiple layers, with piping installed vertically and horizontally as needed for proper connection to municipal sewer main. Gravel bedding properly placed at trench bottom to provide stable foundation for lateral line. All work performed in accordance with local plumbing codes and ready for final municipal inspection.

Responded to service call for sewer line obstruction at commercial property. Customer had previously performed camera inspection which identified clog requiring excavation and repair. Conducted on-site assessment of affected area behind building where underground piping is located. Evaluated surface conditions showing significant cracking and existing utility markings, indicating previous ground disturbance. Examined exterior drainage system including exposed PVC piping near building foundation. Documented site conditions including pavement deterioration, wall staining patterns suggesting potential drainage issues, and accessibility constraints due to proximity of dumpster and service entrance. Prepared comprehensive estimate for excavation, pipe repair or replacement, and surface restoration work required to resolve the blockage.

Conducted comprehensive on-site evaluation for complete home re-piping project. Assessed existing plumbing infrastructure throughout property, including basement mechanical systems with aging copper supply lines showing oxidation and patina, black insulated pipes, and metallic ductwork. Documented current pipe routing, condition of materials, and access points in utility areas and storage spaces. Provided detailed estimate for full residential re-pipe installation based on visual inspection and photographic documentation of existing conditions.

Installed approximately 25 feet of interior gas piping to extend service from the exterior meter assembly to the basement utility area. Routed new gas line through basement ceiling joists using appropriate hangers and supports, terminating near laundry and mechanical equipment location. All connections were pressure tested, inspected for leaks using approved detection methods, and verified to meet code requirements for residential gas installations.

Completed drain unclogging service in basement following initial water removal by previous technician. Cleared obstruction from drainage system and verified proper flow through plumbing lines. Inspected basement utility area including PVC drainage pipes, copper supply lines, and associated mechanical systems to ensure full restoration of drainage function.

Responded to basement water intrusion complaint following recent downspout replacement. Upon inspection, identified sump pump system and drainage access point in basement floor area. Exterior assessment revealed potential water infiltration points at door threshold and foundation perimeter where landscaping meets concrete surfaces, with visible moisture staining and organic growth indicating ongoing water exposure. Documented existing conditions of sump pump cover with temporary sealing measures and drainage hose configuration for follow-up service scheduled.

Responded to service call for circuit breaker repeatedly tripping on septic pump system. Upon arrival, inspected outdoor septic sump basin and associated electrical components. Found submersible pump in concrete basin with visible signs of system age and weathering. Assessed pump operation, float switch functionality, and electrical connections at outdoor utility area near meter assembly. Evaluated PVC discharge piping system and verified proper drainage configuration. Documented existing conditions showing stagnant water levels, pump positioning, and overall system setup including white float device and plumbing connections along exterior wall. Performed diagnostic testing to determine root cause of electrical overload condition affecting dedicated pump circuit.

Replaced severely corroded gas piping from the meter to the house entry point. The existing piping system showed extensive rust and weathering damage throughout the horizontal runs and connection points, requiring complete replacement to ensure safe gas delivery and system integrity.

Responded to main drain blockage with complete stoppage. Upon arrival, accessed main drain cleanout in basement utility area and successfully cleared obstruction using appropriate drain cleaning equipment. Verified proper drainage flow restored throughout system and confirmed all fixtures draining normally upon completion.

Sold repair for water treatment system installation requiring replacement parts. Collected deposit and placed order on hold pending warehouse confirmation for copper piping fittings and valve components needed to complete the plumbing connection to the existing filtration unit mounted on the utility wall.

Responded to callback for recurring drain backup issue in commercial hallway following previous service visit. Inspected floor drain and surrounding plumbing system, documented conditions with photos showing polished corridor with center floor drain and wet floor signage in place. Customer reported persistent backup problems despite recent service, requiring further assessment of main line drainage system.

Completed septic tank pumping service for a residential single-tank system with a total capacity of 1,500 gallons. Performed thorough inspection of tank components including risers, lids, and baffles, documenting conditions on official health district septage pumping report form. Properly disposed of septage at authorized wastewater treatment facility in accordance with local health department regulations.

Responded to service call regarding two toilet flanges that had been previously discussed. Upon inspection, removed and assessed existing flange assemblies, which showed signs of wear and deterioration. Documented conditions with photographs for service records and prepared recommendations for flange replacement to ensure proper toilet mounting and seal integrity.

Conducted on-site assessment for whole home re-plumb estimate. Inspected existing plumbing infrastructure including water heater installation with flexible supply connectors, shut-off valves, and venting system in basement utility area. Evaluated copper supply lines and existing piping configuration throughout accessible areas to determine scope of complete residential re-piping project.

Pumped and decommissioned a two-tank septic system totaling 2,500 gallons in preparation for complete system replacement. Tanks were scheduled to be crushed and filled on-site, with septage properly disposed of at the municipal wastewater treatment facility in accordance with local health district regulations.

Performed hydro-jetting service on main sewer line experiencing mud infiltration through exterior cleanout access point. Additionally cleaned out sump pump crock to remove accumulated sediment and debris, restoring proper drainage function to both systems.

Relocated commercial gas meter assembly from existing position to new exterior wall location, requiring installation of approximately 30 feet of gas piping. Installed new gas line routing from basement mechanical space through wall penetration to exterior meter location, utilizing proper supports and fittings throughout the run. Mounted green metal meter enclosure on building exterior with appropriate standoff clearances, connected supply piping with code-compliant joints and valves, and completed pressure testing to verify system integrity.

Responded to service call for sump pump evaluation. Upon inspection, found existing sump pump showing signs of burnout with significant deterioration of the basin crock. The sump basin exhibited extensive corrosion on the metal base plate, heavy biological growth including mold and algae buildup throughout the interior surfaces, and substantial rust staining. The float mechanism and discharge piping were assessed for functionality. Documented existing conditions with photographs showing the corroded metal components, contaminated basin surfaces with dark slimy deposits, and mineral accumulation on surrounding surfaces. Provided free estimate for replacement of both the sump pump unit and deteriorated crock basin due to advanced wear and unsanitary conditions that could compromise system performance and reliability.

Responded to backup in downspout system causing flooding in backyard. Excavated affected area to locate and access underground drainage line, identified blockage in ground water drain connected to downspout discharge. Cleared obstruction, verified proper flow, and restored drainage function to prevent further water accumulation.

Responded to a plumbing service call for a cracked sump pump discharge line. Upon inspection, identified damage to the PVC pipe connecting the sump pump to the sewer drainage system at the exterior foundation. Replaced the compromised section of discharge piping with new PVC components, including proper elbow fittings to ensure adequate water diversion away from the building foundation. Tested the system for proper flow and verified no additional leaks were present in the drainage assembly.