Top-Rated Commercial Plumbers in Akron, OH

Completed installation of approximately 20 feet of gas piping inside the building, with proper connection to the exterior utility meter. Installation included necessary valve placement and weatherproof connections to ensure system integrity despite exterior elements and seasonal conditions.

Conducted a comprehensive inspection of basement plumbing system, focusing on bathroom fixtures and associated PVC piping. Documented evidence of water damage and possible mold growth on concrete block walls near toilet installation. Photographed exposed plumbing infrastructure including main supply lines, waste pipes, and ventilation ducts for complete estimate preparation.

Completed visual inspection of bathroom plumbing system with significant concerns identified. Documented extensive water damage to wooden wall panels surrounding shower fixture assembly, with visible mold growth and deterioration. Recommended immediate replacement of aging shower valve, flexible hose connection, and comprehensive remediation of affected wall structures to prevent further moisture damage and potential health hazards.

Conducted initial assessment of upstairs bathroom plumbing system requiring complete update. Inspection revealed exposed ceiling with deteriorated wooden joists, aging PVC pipes, and possible water damage. Documentation of existing infrastructure shows multiple plumbing lines requiring replacement, with particular attention to copper fittings that show signs of wear.

Performed jet service on sump pump and downspout drainage system to clear blockage. Inspected exterior discharge pipe and confirmed proper water flow after service was completed. Snow accumulation around discharge area was noted and cleared to ensure unobstructed drainage.

Responded to service call for sump pump gurgling issue. Upon inspection, found main drain line with standing water indicating blockage. Cleared obstruction in exterior drain access point, which was surrounded by snow, restoring proper drainage function and eliminating gurgling noise from sump pump system.

Conducted an estimate for shower valve and waterline replacement. Current installation shows aged copper pipes with visible corrosion beneath floor joists alongside newer PVC sections. Bathroom examination revealed damaged tile surrounding the shower head fixture and an outdated bathtub with mint green interior requiring comprehensive plumbing system updates.

Conducted site assessment for installation of a cleanout on sewer line system. Inspected existing PVC drainage infrastructure including P-trap configuration and surrounding plumbing components. Evaluated access points and mechanical connections to determine optimal location for cleanout installation that would provide effective maintenance access while maintaining system integrity.

Responded to service call for clogged drain in men's restroom where preliminary work had been started by another technician. Completed drain clearing in the restroom and serviced a utility sink faucet with weathered cross-handle valves and red cap adapter. Additionally, addressed flush meter issues on urinal to restore proper functionality.

Inspected main water valve at condo unit and identified significant water damage on wall adjacent to water heater, likely from valve leakage. Repaired defective main valve to restore proper functionality and examined bathroom tub diverter/spout, completing necessary repairs to resolve water flow issues.

Inspected newly installed tub (installed approximately one week ago) and documented a vertical crack in the lower portion of the tub wall where water contact occurs. Photographed damage for documentation purposes, confirming the presence of a crack in the PCB (Prefabricated Composite Bathing) unit at the point of water impact.

Responded to emergency call for sump pump alarm activation with crock at overflow risk, despite recent replacement of pump system components two months prior. Conducted site assessment and documented exterior property conditions. Serviced system to restore proper functionality and prevent basement flooding.

Diagnosed and repaired a leaking soil stack in basement utility area with significant water damage to surrounding walls and floor. Identified severe corrosion at copper pipe junction and deterioration of PVC drainage system components. Replaced damaged pipe sections, fittings, and clean-out access cap, then sealed all connections to prevent further leakage.

Installed approximately 60 feet of 1-1/4" gas piping to connect the building's Generac standby generator. Piping was routed along the exterior of the building, properly secured to the concrete block wall, and connected to existing gas service. System was pressure tested and verified for proper operation.

Responded to service call regarding odor emanating from basement drain. Upon inspection, discovered improper drainage assembly with deteriorated components including a non-code compliant accordion-style flexible pipe and corroded metal section showing significant mineral buildup. Replaced damaged components with proper PVC piping and sealed all connections to eliminate sewer gas odor.

Upon inspection of basement laundry tub, identified severely corroded metal P-trap with active leakage causing significant water damage to surrounding wooden framing members and floor. Removed deteriorated metal trap assembly and installed new code-compliant PVC P-trap with proper connections to existing drain line, restoring proper drainage function and eliminating leak.

Replaced multiple water supply stops in Jack and Jill bathroom and guest bath as requested by customer. Noted water stains under sink drain assemblies during service, indicating previous minor leaks. Additional plumbing work scheduled for future appointment per customer's preference.

Installed approximately 10 feet of gas piping through interior structural space, connecting to the exterior gas meter. Work included proper fitting of supply lines through framed areas with insulation while ensuring code-compliant installation and secure connection to the outdoor meter unit despite winter weather conditions.

Responded to service call for kitchen drain backup. Inspection revealed significant corrosion on metal fittings connecting to the P-trap assembly, with visible mineral deposits and deterioration of connecting valve. Removed affected components, cleaned accumulated debris from P-trap, and replaced corroded metal fittings with new parts to restore proper drainage function.

Responded to a water leak call at a 35-year-old residence involving a bathtub drain. Upon inspection, accessed plumbing through a removed wall tile and identified aging P-trap assembly in the utility area showing signs of water damage and deterioration at ceiling connection. Replaced compromised drain components, sealed connections properly, and verified system integrity with leak test before completing the repair.