Commercial Plumbing Services in Kent, OH

Responded to report of water damage near basement downspout drain. Performed video camera inspection of downspout drainage system to identify potential cracks or damage causing water infiltration. Documented findings with photographic evidence of exterior property conditions and relevant utility infrastructure for diagnostic purposes.

Responded to plumbing repair and inspection call. Upon arrival, conducted thorough assessment of existing plumbing infrastructure in basement utility area. Inspected vertical copper supply lines, shut-off valves, and flexible braided supply connections for leaks, corrosion, and proper operation. Identified area requiring wall access to reach plumbing components behind finished surface. Created access opening in concrete block wall to expose and service affected piping. Verified all connections were secure, tested valve operation, and confirmed no active leaks present. Documented existing conditions with photographs for customer records.

Responded to main line backup call and arrived on site. Located main drain cleanout access point in front yard area near street, marked with utility paint. Successfully cleared blockage in main sewer line, restoring proper drainage and flow to the system.

Excavated and replaced approximately 40 feet of corroded exterior water line from the meter at the curb to the home using 1" copper pipe and brass fittings. Trench was dug through the yard, extending under one sidewalk section which required slab removal for access. The existing line showed significant corrosion and deterioration at connection points, with heavy rust buildup and mineral deposits visible on the old piping. New copper line was installed along the trench bottom, properly fitted and connected at the meter junction. Excavated soil was staged alongside the trench for backfilling upon inspection approval. Work was performed under permit with municipal inspection scheduled as required.

Responded to customer concern regarding water intrusion in basement with suspected underground drain line blockage. Conducted exterior property inspection to assess potential drainage issues and identify water entry points. Documented exterior conditions including pathway drainage patterns, ground surface conditions, and exterior grade around foundation. No active plumbing repairs performed during this diagnostic visit.

Installed approximately 10 feet of gas piping inside the basement utility area, connecting to the existing green gas meter with gray metal pipes configured in vertical and horizontal runs. The installation included multiple elbow joints to properly route the gas line through the space, ensuring secure connections and compliance with gas piping standards.

Responded to service call for water backing up into kitchen and bathroom sinks. Upon arrival, assessed the drainage system and identified blockage causing backup in multiple fixtures. Cleared obstruction from main drain line, restoring proper water flow to all affected sinks and verifying complete drainage throughout the system.

Responded to emergency main drain backup in basement area. Upon arrival, found significant standing water accumulation on basement floor indicating complete drainage obstruction. Performed main drain cleanout procedure to clear blockage and restore proper flow, eliminating the backup condition and allowing accumulated water to drain from the affected area.

Completed initial service call to assess and install reverse valve on exterior ceramic pipe system located in yard. Upon arrival, found existing drainage infrastructure with heavily corroded circular metal grate cover and deteriorated wire mesh components showing significant rust and weathering. The access point was partially obstructed by accumulated organic debris, fallen leaves, and overgrown vegetation. Cleared debris from work area and exposed the ceramic pipe section requiring valve installation. The existing drainage system showed signs of prolonged moisture exposure with moss and algae growth on surrounding concrete structures. Successfully installed reverse valve on the one-foot ceramic pipe section to prevent backflow and ensure proper drainage function. Verified valve operation and secured all components. Work area was cleared of construction debris upon completion.

Installed approximately 10 feet of new gas piping on building exterior to extend natural gas service. Connected new copper gas line to existing meter assembly using appropriate fittings and joints, ensuring proper routing and secure mounting to exterior wall per code requirements.

Responded to service call regarding a water leak at the water heater. Upon inspection, identified the source of the leak and documented the existing plumbing configuration, including the P-trap drain system and the GE SmartWater heater installation with expansion tank. Provided customer with quote for necessary repairs, which will require removal of utility sink to complete the project.

Responded to a commercial water leak in a garage ceiling beneath kitchen sink area. Upon inspection, discovered deteriorated drywall, wet insulation, and water damage in the ceiling cavity. Located leak source at drain pipe junction where moisture was accumulating on pipe surfaces passing through wooden structural members, and completed necessary repairs to resolve the issue.

Investigated and repaired shower valve assembly leaking through ceiling below. Identified mineral deposits and deteriorated valve components causing water to escape during operation. Serviced diverter mechanism and resealed connection points to prevent further leakage.